LMI TECHNOLOGIES · SALES AND SERVICE PARTNER, INDIA

LMI Technologies Gocator 3D Smart Sensors – India Sales, Integration & Support

DESSAR is the sales and service partner for LMI Technologies in India. We supply Gocator 3D laser profilers and smart sensors, build them into inspection and measurement systems, commission them on your line and stay to support them.

One team for the sensor and the system around it

A 3D sensor on its own measures nothing useful until it is mounted at the right distance, triggered with the motion, calibrated to the part and connected to the line. That work is what DESSAR does. As LMI Technologies’ sales and service partner in India, we are the people who select the Gocator sensor with you, prove it on your parts and remain answerable for it once it is running.

DESSAR is an applications engineering company in Pune, not a catalogue reseller. The team has worked with laser profilers and snapshot 3D sensors for more than ten years, on reflective surfaces, parts in motion and tolerances that a 2D camera cannot hold.

SalesGocator sensors, accessories and vision accelerators, supplied in India with the selection made against your application.
IntegrationMounting, motion, calibration, measurement tools and the PLC or robot handshake, delivered as a working station.
CommissioningInstalled, aligned and proven on the line with a measurement study, then handed over with your operators trained.
ServiceFirst-line support from Pune, on-site visits, and warranty and repair cases handled together with LMI Technologies.

Gocator product families

Every Gocator is a smart sensor: it scans, measures and decides on board, and is set up from a web browser. The families differ in how they capture the surface.

FamilyPublished headline figuresWhere it fits
Gocator 2600 Series3D laser line profiler9-megapixel imager, up to 4192 points per profile, X resolution down to 0.0025 mm, fields of view up to 2 m, red and blue laser optionsWide parts and fine detail in one sensor: body panels, tyres, battery modules, extrusions, timber and boards
Gocator 2700 Series3D laser line profiler, blue laser3200 points per profile, X profile spacing down to 4.0 µm, scan rates up to 20 kHz, Z repeatability from 0.2 µm, measurement range 6 to 80 mm across five models, IP67Small components and reflective surfaces at high line speed: connectors, electronics, lithium battery parts, machined features
Gocator 3500 SeriesStructured-light 3D snapshot sensor5-megapixel stereo cameras, scan rates up to 6 Hz, field of view up to 282 × 175 mmParts that stop or are robot-presented: castings, machined housings, assemblies, robot-guided inspection
Gocator 4000 SeriesCoaxial line confocal sensorUp to 1920 points per profile, X resolution to 1.9 µm, field of view up to 5 mm, slope angles to ±85°, scan rates up to 36 kHz with accelerationGlass, mirror-like, transparent and multi-layer surfaces; steep edges and very small features
Gocator 2D Smart Cameras2D smart camera with on-board AIUp to 84 fps, IP67, GoPxL vision software running on the cameraPresence, position, reading and AI defect classification beside a 3D station

Figures are LMI Technologies’ published data for each series and vary by model; the 2700 Series figures are from the LMI datasheet. Other Gocator series, with a datasheet per model, are in the vision hardware catalogue. Full manufacturer information: lmi3d.com. Capability on your part is established in a trial.

How 3D laser profiling works

A laser line profiler projects a line of light across the part and views it from an angle. Where the surface is higher or lower, the line shifts on the sensor’s imager, and from that shift the sensor calculates a height for every point along the line. This is laser triangulation. One exposure gives one cross-section, the profile.

Move the part under the sensor, or the sensor over the part, and the profiles stack into a complete 3D surface. An encoder ties each profile to the motion, so the spacing stays true when the conveyor speeds up or slows down.

Because the result is height and not brightness, a 3D measurement does not depend on the colour of the part or on the lighting in the building. That is why a profiler holds a step height, a flatness or a bead volume where a 2D camera cannot.

ProjectA red or blue laser line falls across the part.
TriangulateThe imager sees the line shift with height and converts it to a calibrated profile.
Build the surfaceEncoder-triggered profiles stack into a 3D scan of the whole part.
Measure and decideBuilt-in tools read the dimensions and send pass or fail to the line.

What the sensors measure

The measurement tools run inside the sensor, with no programming, and are extended when an application needs more.

DimensionsHeight, step, width, gap, flush, angle, radius, diameter and position.
FormFlatness, warp, profile deviation and surface comparison against a master.
Volume and areaAdhesive and sealant beads, weld seams, fill level, portions.
Surface defects in 3DDents, bulges, scratches with depth, missing material.
Multi-sensor systemsSeveral sensors aligned to one coordinate system for wide parts, both faces or a full ring.
AI toolsAnomaly detection, classification and object detection in LMI’s GoPxL software, beside the measurement.

Automotive and manufacturing applications

Where 3D profiling earns its place on Indian production lines.

Integration and automation

The sensor is one part of a station. DESSAR delivers the rest.

PLC and line controlPROFINET, EtherNet/IP, Modbus and ASCII, with digital outputs for reject and encoder input for motion.
Robots and cobotsRobot-carried profilers on multi-pose scan paths, and 3D data for robot guidance.
Mechanics and motionMounts, linear and rotary stages, fixtures and guarding designed for the measurement.
Software and reportingOperator screens, per-part reports, trend charts and traceability to your plant systems. DESSAR 3D Vision Scope is our own station software for Gocator profilers.

Installation and commissioning

Feasibility on your partsGood and reject samples scanned, the sensor chosen, and what is measurable stated plainly.
DesignSensor position, motion, fixture, cycle time and the interface to your line agreed before build.
Install and alignSensors mounted, aligned and calibrated; multi-sensor systems brought into one coordinate frame.
Prove the measurementRepeatability and correlation against your reference method, on production parts.
Hand overOperators and maintenance trained, documentation and backups left on site.

Technical support in India

Application engineers, not a call centreThe people who answer are the people who commission the systems.
Remote and on siteRemote diagnosis first; an engineer at your plant when the fault needs it.
Existing installationsGocator sensors already on your line can be reviewed, re-commissioned or extended.
TrainingSensor setup, measurement tools and maintenance, taught on your own station.

Frequently asked questions

Is DESSAR a partner of LMI Technologies in India?

Yes. DESSAR Systems India Private Limited is the sales and service partner for LMI Technologies in India. We supply Gocator 3D smart sensors, integrate them into inspection and measurement systems, commission them on the line and support them afterwards. LMI Technologies lists its partners and contacts on lmi3d.com.

Where in India does DESSAR supply and support Gocator sensors?

Across India, from our works in MIDC Pimpri-Chinchwad, Pune. Feasibility trials are run on your own parts at our works or at your plant, and commissioning and service are carried out on site.

Which Gocator sensor is right for my part?

It depends on the feature size and tolerance, the surface (matt, machined, plated, glass, rubber), the width to be covered and the line speed. Laser line profilers suit parts in motion; snapshot sensors suit parts that stop; line confocal sensors suit glass, mirror-like and multi-layer surfaces. We select the sensor against your drawing and samples and prove it in a trial before anything is ordered.

Can a Gocator sensor work without a PC?

Yes. Gocator sensors are smart sensors: scanning, measurement tools and pass or fail decisions run inside the sensor and are set up from a web browser. Results go straight to the PLC or robot. A PC or a GoMax vision accelerator is added only when the application needs heavier processing or several sensors combined.

How does a Gocator sensor connect to a PLC or a robot?

Over Gigabit Ethernet using the industrial protocols LMI publishes for the sensor family, such as PROFINET, EtherNet/IP, Modbus and ASCII, with digital outputs and an encoder input for motion-synchronised scanning. DESSAR writes and proves the handshake with your PLC or robot controller during commissioning.

Why choose blue laser over red laser?

Blue laser gives cleaner data on shiny, machined and plated metal and on small features, because it scatters less inside the surface. Red laser gives more signal at long range and on dark or large targets. The choice is made on your part, not on a rule.

Can 3D laser profiling replace a CMM?

It does not replace the CMM in the metrology room. It puts a check on every part at line rate for the features that matter, with the measurement uncertainty established against a calibrated reference during the trial.

How do I get a price for a Gocator sensor or a complete system?

Send the part drawing with tolerances, a few samples or images, and the line rate. We reply with what is measurable and the sensor that fits, and a quotation follows against that application. Sensor-only supply and complete turnkey systems are both available.

Start with the part, not the part number

Send the drawing with tolerances, two or three samples or images, and the line rate. We come back with what is measurable, the Gocator sensor that fits, and what it takes to put it on your line.