ELECTRONICS

Small parts, fine pitch, and a defect that costs a whole assembly.

Connectors, headers, PCBs, terminal strips and enclosures move fast and carry features that are fractions of a millimetre. The inspection has to resolve them at line rate and prove it did.

Start an electronics enquiry The systems that fit

The problems we are usually called about

What matters in electronics

Fine pitchPin pitches down to a fraction of a millimetre resolved with the lens and lighting chosen for the pin tips, not the housing.

Line rateCounting, position and bend on every part at the rate the line runs, with the verdict handed to the machine.

Print and markersMarker text, codes and colours read under controlled light, so the reading does not depend on the bench lamp.

Record per partEvery part logged with its image, so a questioned batch has an answer.

The systems that fit

Each one opens on the Solutions page with its live demo and datasheet. The catalogue of cameras, lenses, lights and 3D profilers and the configurator are separate pages.

DSR-PCI

Pin Count Inspector

Counts pins and needles and proves every one is present, at line rate, with the verdict handed to the machine.

Demo and datasheet → DSR-TBV

Terminal Block Inspection

Verifies a DIN-rail terminal assembly against the master: sequence, colour, the markers read by eye, dimensions.

Demo and datasheet → DSR-STN

Defect Inspection Station

Finds surface and cosmetic defects that no fixed rule describes, learnt from your own good and rejected parts.

Demo and datasheet → DSR-3DVS

3D Vision Scope

The part in three dimensions, dimensions read off it, defects marked, and a report at the end.

Demo and datasheet →

Feasibility first.

Send samples or images and the rate the line runs at. The answer is what is detectable, at what rate, and what it takes, before anyone commits to a cell. Capability figures and programme detail are issued against your own application.

Start the enquiry Call +91 93268 52006

The problems we are usually called about

Missing or bent pins on connectors and headers

Terminal block assemblies out of sequence

Surface defects on housings and painted enclosures

Dimensional checks on moulded and stamped parts