3D SENSORS · SUPPLIED AND SUPPORTED IN INDIA

3D snapshot sensors for stationary parts, supplied and supported in India

A snapshot sensor captures a full 3D surface in a single shot, with no motion. DESSAR Digital Intelligence supplies snapshot 3D sensors, proves them on your part, and builds them into inspection and robot cells.

What a 3D snapshot sensor is

A snapshot sensor projects a sequence of light patterns onto the part and views them with one or two cameras. From the way the patterns bend over the surface it calculates a dense 3D point cloud of everything in its field of view. The method is structured light, usually with stereo cameras.

It is the right choice when the part is stationary or is presented by a robot: castings, machined housings, assemblies, and pick-and-place or robot guidance. When the part is moving on a conveyor, a 3D laser profiler is the better tool.

How to choose one

Field of viewThe part, or the area of interest, must fit in one shot at the working distance.
ResolutionPoint spacing in X and Y and repeatability in height against your tolerance.
Cycle timeCapture plus processing must fit the time the part is still.
SurfaceVery shiny or dark surfaces may need exposure settings proved in a trial.
MountingFixed above a station, or carried on a robot for several poses.

What DESSAR supplies

Supplied in India, selected against your application, and supported by the engineers who build the systems.

Common questions

Who supplies 3D snapshot sensors in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies, integrates and supports 3D snapshot sensors across India. DESSAR is the sales and service partner for LMI Technologies, the maker of Gocator snapshot sensors, in India.

What is the difference between a snapshot sensor and a laser profiler?

A snapshot sensor captures the whole surface of a stationary part in one shot. A laser profiler captures one line at a time and needs the part or the sensor to move.

Can a snapshot sensor guide a robot?

Yes. The 3D point cloud gives the position and orientation of the part, which is sent to the robot for picking, placing or following a path.

How fast is a 3D snapshot sensor?

A capture typically takes a fraction of a second. LMI publishes scan rates of up to 6 Hz for the Gocator 3500 Series; the usable cycle time depends on the measurements run on each scan.

Start with the application

Send the part, what must be seen or measured, and the line rate. We reply with the camera or sensor that fits and what it takes to put it on your line.