DESSAR Digital Intelligence is an authorised channel partner for Allied Vision in India. We supply the cameras, and we also do the part most buyers need more: choosing the right one for the inspection, building it into a working system, and supporting it on the line.
Since January 2026 the 2D machine vision brands of TKH Vision – Allied Vision, Chromasens, Mikrotron, NET and SVS-Vistek – are united under the Allied Vision brand. The range below is what DESSAR lists, model by model, in its catalogue.
| Family | What the catalogue shows | Where it fits |
|---|---|---|
| AlviumCompact and embedded cameras | 0.3 to 24.6 MP on USB3 Vision, GigE, 5GigE, MIPI CSI-2, GMSL2 and FPD-Link III; housed, open-housing and board-level builds | Embedded vision, compact machines, multi-camera stations |
| Mako, Manta, Prosilica GTGigE Vision area scan | 0.4 to 31.4 MP on GigE Vision | General factory inspection, long cable runs, outdoor and rugged installations |
| Goldeye, Goldeye Pro, AlecsShort-wave infrared (SWIR) | InGaAs and visible-to-SWIR sensors, 0.08 to 12.4 MP, on GigE, 5GigE and Camera Link | Seeing through silicon and plastics, moisture, fill level, sorting by material |
| EXOIndustrial area scan | 0.3 to 31.4 MP on GigE, USB3 and Camera Link | Strobe-synchronised inspection and precise multi-light sequences |
| FXOHigh-speed interfaces | 1.3 to 24.6 MP on 10GigE and faster Ethernet, and CoaXPress | High resolution at high frame rate |
| HR and SHRHigh and super-high resolution | 12.7 to 245.8 MP on 10GigE, CoaXPress and Camera Link | Flat panel, PCB and large-field inspection where one image must hold fine detail |
| EoSensHigh-speed cameras | 1.1 to 21 MP on CoaXPress and Camera Link | Fast processes, motion analysis and high-rate inspection |
| allPIXA and chromaPIXAColour line scan | Colour, mono and SWIR line scan on 10GigE, CoaXPress, Camera Link and GigE | Web, print, PCB, food and surface inspection of continuous material |
| 3DPIXAStereo 3D line scan | Simultaneous colour image and height data from one line scan camera | 3D surface inspection of moving parts at fine resolution |
Ranges are taken from the 707 Allied Vision models in the DESSAR vision hardware catalogue, built from the manufacturer’s published data; each model has its own datasheet there. Manufacturer information: alliedvision.com. Brand announcement: TKH Group, January 2026.
Scratches, dents, coating and texture defects on metal, plastic and glass, with AI where a fixed rule cannot describe the defect.
Surface defects →Diameters, lengths, positions and gaps measured on every part with telecentric optics and a calibrated camera.
Dimensional checks →Web, sheet, print and cylindrical parts inspected with line scan cameras at line speed.
Line scan cameras →PCB, connector and component inspection where resolution and colour fidelity both matter.
Electronics →Print, fill, seal and contamination checks, including SWIR for what visible light cannot show.
Pharmaceuticals →Cameras that locate the part and send its position to the robot.
Solutions →DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) is an authorised channel partner for Allied Vision in India. It supplies Allied Vision cameras and integrates them into complete inspection, measurement and robot guidance systems.
Yes. Cameras, lenses, cables and lights are supplied on their own. We check the selection against your application first so the parts work together.
Yes. TKH Vision united its 2D machine vision brands, including Chromasens, Mikrotron, NET and SVS-Vistek, under the Allied Vision brand from January 2026. The allPIXA, EXO, FXO, HR, SHR and EoSens families are listed under Allied Vision in our catalogue.
It depends on the smallest feature, the field of view, how fast the part moves and how far the cable runs. Send those four numbers and we reply with a camera, lens and light that fit. The camera planner gives a first answer from your own numbers.
Yes. Every Allied Vision model in the vision hardware catalogue has its own datasheet.
Yes. Commissioning, operator training, troubleshooting and replacement are handled by DESSAR engineers in India.
Send the part, what must be seen or measured, and the line rate. We reply with the Allied Vision camera that fits and what it takes to put it on your line.