INDUSTRIAL CAMERAS · SUPPLIED AND SUPPORTED IN INDIA

Line scan cameras for continuous inspection, supplied and supported in India

DESSAR Digital Intelligence supplies line scan cameras and builds the complete station around them: camera, lens, line light, encoder and frame grabber, matched to your speed and resolution.

What a line scan camera is

A line scan camera has a single row of pixels, or a few rows. It captures one line at a time while the material moves past, and the lines are stacked into an image of any length. An encoder ties each line to the motion so the image is not stretched when the speed changes.

It is the right choice for continuous material such as sheet, film, foil, paper, textile and print; for long parts; and for the surface of a rotating cylinder. Where the part stops and fits one view, an area scan camera is simpler.

How to choose one

Resolution across the widthWidth divided by pixels gives the size of one pixel on the material; allow three to four pixels on the smallest defect.
Line rateLine speed divided by pixel size gives the line rate the camera must reach.
LightLine scan needs a bright, even line light; exposure times are very short.
Mono or colourTrilinear and colour line cameras for print and colour-critical work; mono for speed and sensitivity.
InterfaceGigE for moderate rates; 10GigE, Camera Link and CoaXPress with a frame grabber for high rates.

What DESSAR supplies

Supplied in India, selected against your application, and supported by the engineers who build the systems.

Common questions

Who supplies line scan cameras in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports line scan cameras across India, including Chromasens allPIXA and Hikrobot CL series cameras, with the line lights, encoders and frame grabbers that go with them.

When should I use a line scan camera instead of an area scan camera?

Use line scan when the material is continuous, the part is longer than one field of view, the surface is cylindrical, or the resolution needed across the width is higher than an area camera gives.

Why does a line scan camera need an encoder?

The encoder triggers one line for each fixed distance of travel, so the image keeps its true proportions when the conveyor or web speeds up or slows down.

How do I work out the line rate I need?

Divide the line speed by the pixel size on the material. A web at 1 m/s inspected at 0.1 mm per pixel needs 10,000 lines per second, or 10 kHz.

Start with the application

Send the part, what must be seen or measured, and the line rate. We reply with the camera or sensor that fits and what it takes to put it on your line.