DESSAR Digital Intelligence supplies industrial area scan cameras and builds them into inspection systems. More than 1,200 models are in our catalogue, each with a datasheet, and the camera is chosen against your part, not from a price list.
An area scan camera captures a complete rectangular image in one exposure, the way a photograph is taken. It is the right choice when the part stops, or moves slowly enough to freeze with a short exposure or a strobe: presence and position checks, reading codes and print, measuring a part that fits in one field of view, and AI defect inspection.
If the part is long, continuous or wrapped round a cylinder, a line scan camera is usually the better tool. If the feature is a height, a step or a flatness, the job needs a 3D laser profiler.
Supplied in India, selected against your application, and supported by the engineers who build the systems.
Our own range, GigE and USB3, specified and quoted against your application with a DESSAR datasheet.
Ask for the range →665 area scan models from 0.08 MP to above 200 MP: Alvium, EXO, FXO and more, on GigE, 10GigE, USB3, CoaXPress and MIPI CSI-2.
Models and datasheets →563 area scan models across the CA, CB, CE, CH, CS, CT and CU series, on GigE, USB3, 10GigE, CoaXPress and Camera Link.
Models and datasheets →DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports industrial area scan cameras across India, including its own DESSAR range and cameras from Allied Vision and Hikrobot, and integrates them into complete inspection systems.
Divide the field of view by the smallest feature you must see and multiply by three or four. A 100 mm field with a 0.1 mm defect needs roughly 3,000 to 4,000 pixels across, which is a 12 MP class camera.
GigE Vision runs to 100 m on standard network cable and suits multi-camera systems. USB3 Vision gives higher data rates over a few metres. For very high resolution at speed, 10GigE or CoaXPress is used.
Yes. Cameras, lenses and lights are supplied on their own, and the selection is checked against your application first so the parts work together.
Send the part, what must be seen or measured, and the line rate. We reply with the camera or sensor that fits and what it takes to put it on your line.