The allPIXA neo 4k CXP Mono is a line scan camera from Allied Vision: resolution 4096 × 1; line rate 250 kHz; interface CoaXPress; sensor line-scan-2d. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

| Resolution | 4096 × 1 |
|---|---|
| Line rate | 250 kHz |
| Interface | CoaXPress |
| Sensor | line-scan-2d |
| Pixel size | 7 µm |
| Mono / colour | Mono |
| Spectrum | Visible |
| Lens mount | M42 × 1 mm / F-Mount, TFL |
| Status | Available |
As published by Allied Vision for this model.
| Model | allPIXA neo 4k CXP Mono |
|---|---|
| Product code | CP000660-04k-44-M1-A1 |
| Product series | allPIXA neo CXP |
| Status | Available |
| Sensor type | Line scan 2D |
|---|---|
| Chroma | Mono |
| Spectrum | Visible |
| Spectral range | 400 nm to 960 nm |
| Resolution | 4,096 × 1 lines |
| Sensor architecture (material) | cmos |
| Pixel size | 7.00 µm × 7.00 µm |
| Data format | 8/10/12 Bit mono |
|---|
| Max. line rate single-line | 250 kHz |
|---|
| I/O connector | External I/O (15 pin HD D-Sub, male) |
|---|---|
| Power supply | Power over CXP or digital I/O port |
| Power consumption | External: 12 W |
| Body dimensions (L x W x H in mm) | 62 × 62 × 62 |
|---|---|
| IP class | IP50 |
| Lens mount(s) | M42 × 1 mm / F-Mount, TFL |
| Weight | 350 g |
| Image buffer (RAM) | 512 MByte |
|---|---|
| Non-volatile memory (Flash) | 1024 KByte |
| Digital interface | 2 x cxp-12 micro-bnc |
|---|---|
| Interface connector | Micro-BNC |
| Vision standard | CoaxPress |
| Exposure modes | manual |
|---|---|
| Gain modes | auto, manual |
| White balance modes | auto, manual |
DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision allPIXA neo 4k CXP Mono in India. DESSAR is an authorised channel partner for Allied Vision in India.
The specification is on this page, and a datasheet for the allPIXA neo 4k CXP Mono can be downloaded from the DESSAR vision hardware catalogue.
Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.
Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.