ALLIED VISION · AREA SCAN CAMERA

Allied Vision Cube2CGE-CM4

The Cube2CGE-CM4 is an area scan camera from Allied Vision: resolution 1280 × 1024; megapixels 1.3 MP; max frame rate 502 fps; interface GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision Cube2CGE-CM4 area scan camera

Cube2CGE-CM4 key specifications

Resolution1280 × 1024
Megapixels1.3 MP
Max frame rate502 fps
InterfaceGigE
SensorMicron MV-13
Optical format1"
Pixel size12 µm
ShutterGlobal
Mono / colourColour
SpectrumVisible
Lens mountC-Mount
StatusDiscontinued

Full specification

As published by Allied Vision for this model.

General
ModelCube2CGE-CM4
Product codeF006107
Product seriesCube GigE
StatusDiscontinued
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution1,280 × 1,024 (1.30 MP)
Sensor modelMicron MV-13
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size15.36 × 12.29 mm (19.67 mm, Type 1)
Pixel size12.00 µm × 12.00 µm
Pixel formats
Sensor bit depth8-bit
RGB pixel formatsbayer8
Timing and gain
Max. frame rate502 fps
Max. frame rate ROI modes1280 x 1024 | 502 fps,
Exposure time3 µs to 1 s
Gain0.0 dB to 12.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 1 x TTL input, 1 x TTL output, 0 x 24V input, 0 x Open drain output,
Specific non-isolated lines0 x RS232 input, 0 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines4 x Optical isolated input, 0 x Optical isolated input,
I/O connector8-pin LEMO
Power supply10.5 to 30VDC
Power consumptionExternal: 15 W (typical)
Mechanical properties
Body dimensions (L x W x H in mm)111 × 69 × 93
IP classIP30
Lens mount(s)C-Mount
Weight1030 g
Interfaces
Digital interfacegige
Interface connector(RJ-45)
FW features - image control
Gain modesdigital, analog
White balance modestrue
Image control featuresroi, mirror-image
FW features - camera control
Trigger modes/syncexternal

Other Recording models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision Cube2CGE-CM4 in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision Cube2CGE-CM4 in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the Cube2CGE-CM4 datasheet?

The specification is on this page, and a datasheet for the Cube2CGE-CM4 can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the Cube2CGE-CM4 into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the Cube2CGE-CM4

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.