ALLIED VISION · AREA SCAN CAMERA

Allied Vision exo342CGE

The exo342CGE is an area scan camera from Allied Vision: resolution 6464 × 4852; megapixels 31.4 MP; max frame rate 3.8 fps; interface GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision exo342CGE area scan camera

exo342CGE key specifications

Resolution6464 × 4852
Megapixels31.4 MP
Max frame rate3.8 fps
InterfaceGigE
SensorSony IMX342
Optical formatAPS-C"
Pixel size3.45 µm
ShutterGlobal
Mono / colourColour
SpectrumVisible
Lens mountM42
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelexo342CGE
Product codeF002159
Product seriesEXO GigE
StatusAvailable
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution6,464 × 4,852 (31.40 MP)
Sensor modelSony IMX342
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size22.3 × 16.74 mm (27.88 mm, Type APS-C)
Pixel size3.45 µm × 3.45 µm
Pixel formats
Sensor bit depth8-bit, 12-bit
RGB pixel formatsbayer8, bayer12packed
Imaging performance
Dynamic range70.5 dB
SNR39.9 dB
Timing and gain
Max. frame rate3.8 fps
Max. frame rate burst7.6 fps
Exposure time56 µs to 60 s
Gain0.0 dB to 48.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC, Power over Ethernet
Power consumptionExternal: 6 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 65 °C
Mechanical properties
Body dimensions (L x W x H in mm)46 × 58 × 58
Filter/protection glassK9 - AR coating
IP classIP40
Lens mount(s)M42
Weight400 g
On-board memory and FPGA
Image buffer (RAM)192 MByte
Non-volatile memory (Flash)32 MByte
Interfaces
Digital interfacegige
Interface connector(RJ-45)
Vision standardGigE Vision
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
White balance modesauto, manual
Image control featuresroi, lut, color-transformation, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresPTP, BurstMode, User Sets, POE, PWM(4), Sequencer,

Other EXO models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision exo342CGE in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision exo342CGE in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the exo342CGE datasheet?

The specification is on this page, and a datasheet for the exo342CGE can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the exo342CGE into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the exo342CGE

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.