ALLIED VISION · AREA SCAN CAMERA

Allied Vision fxo537M25GE

The fxo537M25GE is an area scan camera from Allied Vision: resolution 2448 × 2048; megapixels 5 MP; max frame rate 262 fps; interface 25GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision fxo537M25GE area scan camera

fxo537M25GE key specifications

Resolution2448 × 2048
Megapixels5 MP
Max frame rate262 fps
Interface25GigE
SensorSony IMX537
Optical format1/1.8"
Pixel size2.74 µm
ShutterGlobal
Mono / colourMono
SpectrumVisible
Lens mountC-Mount
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelfxo537M25GE
Product codeF002314
Product seriesFXO 25GigE
StatusAvailable
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution2,448 × 2,048 (5.00 MP)
Sensor modelSony IMX537
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size6.71 × 5.61 mm (8.75 mm, Type 1/1.8)
Pixel size2.74 µm × 2.74 µm
Pixel formats
Sensor bit depth8-bit, 12-bit
Monochrome pixel formatsmono8, mono12
Imaging performance
Dynamic range72 dB
SNR39 dB
Timing and gain
Max. frame rate262 fps
Exposure time4 µs to 60 s
Gain0.0 dB to 48.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC
Power consumptionExternal: 17.5 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 60 °C
Mechanical properties
Body dimensions (L x W x H in mm)100 × 50 × 50
Filter/protection glassK9 - AR coating - 400-850nm
IP classIP30
Lens mount(s)C-Mount
Weight320 g
On-board memory and FPGA
Image buffer (RAM)4032 MByte
Non-volatile memory (Flash)128 MByte
Interfaces
Digital interface25gige
Interface connector(SFP28)
Vision standardGigE Vision 2.0, 3.0
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
Image control featuresroi, lut, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Camera control featuresPTP, RDMA support, User Sets, PWM(4), Sequencer,

Other FXO models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision fxo537M25GE in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision fxo537M25GE in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the fxo537M25GE datasheet?

The specification is on this page, and a datasheet for the fxo537M25GE can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the fxo537M25GE into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the fxo537M25GE

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.