ALLIED VISION · AREA SCAN CAMERA

Allied Vision fxo925M100GE-FF

The fxo925M100GE-FF is an area scan camera from Allied Vision: resolution 5312 × 4608; megapixels 24.5 MP; max frame rate 442.7 fps; interface 100GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision fxo925M100GE-FF area scan camera

fxo925M100GE-FF key specifications

Resolution5312 × 4608
Megapixels24.5 MP
Max frame rate442.7 fps
Interface100GigE
SensorSony IMX925
Optical format1.2"
Pixel size2.74 µm
ShutterGlobal
Mono / colourMono
SpectrumVisible
Lens mountFlat Front
StatusPrototype/engineering sample

Full specification

As published by Allied Vision for this model.

General
Modelfxo925M100GE-FF
Product codeF002464
Product seriesFXO 100GigE
StatusPrototype/engineering sample
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range350 nm to 1000 nm
Resolution5,312 × 4,608 (24.50 MP)
Sensor modelSony IMX925
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size14.55 × 12.63 mm (19.27 mm, Type 1.2)
Pixel size2.74 µm × 2.74 µm
Pixel formats
Sensor bit depth8-bit, 10-bit, 12-bit
Monochrome pixel formatsmono8, mono10, mono12
Timing and gain
Max. frame rate442.7 fps
Exposure time4 µs to 60 s
Gain0.0 dB to 48.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 2 x Open drain output,
Specific non-isolated lines0 x RS232 input, 0 x RS232 output, 1 x RS422 input, 1 x RS422 output,
Opto-isolated lines0 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply24 to 25VDC
Power consumptionExternal: 28 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 60 °C
Mechanical properties
Body dimensions (L x W x H in mm)87 × 58 × 58
IP classIP30
Lens mount(s)Flat Front
Weight440 g
On-board memory and FPGA
Image buffer (RAM)4032 MByte
Non-volatile memory (Flash)32768 MByte
Interfaces
Digital interface100gige
Interface connector(QSFP28)
Vision standardGigE Vision 3.0
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
Image control featuresroi, lut, mirror-image, dpc, shading-correction, ffc, piv-mode
FW features - camera control
Camera control featuresPTP, RDMA support, User Sets, PWM(4), Sequencer,

Other FXO models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision fxo925M100GE-FF in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision fxo925M100GE-FF in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the fxo925M100GE-FF datasheet?

The specification is on this page, and a datasheet for the fxo925M100GE-FF can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the fxo925M100GE-FF into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the fxo925M100GE-FF

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.