ALLIED VISION · AREA SCAN CAMERA

Allied Vision hr49CCL

The hr49CCL is an area scan camera from Allied Vision: resolution 7008 × 7000; megapixels 49 MP; max frame rate 17 fps; interface Camera Link. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision hr49CCL area scan camera

hr49CCL key specifications

Resolution7008 × 7000
Megapixels49 MP
Max frame rate17 fps
InterfaceCamera Link
SensorGpixel GMAX3265-49
Optical format2.3"
Pixel size3.2 µm
ShutterGlobal
Mono / colourColour
SpectrumVisible
Lens mountM58x0.75
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelhr49CCL
Product codeF004155
Product seriesHR Camera Link
StatusAvailable
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution7,008 × 7,000 (49.00 MP)
Sensor modelGpixel GMAX3265-49
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size22.43 × 22.4 mm (31.7 mm, Type 2.3)
Pixel size3.20 µm × 3.20 µm
Pixel formats
Sensor bit depth8-bit, 10-bit
RGB pixel formatsbayer8, bayer10
Timing and gain
Max. frame rate17 fps
Exposure time21 µs to 60 s
Gain0.0 dB to 18.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC
Power consumptionExternal: 9 W (typical)
Mechanical properties
Body dimensions (L x W x H in mm)76 × 70 × 70
IP classIP30
Lens mount(s)M58x0.75
Weight420 g
On-board memory and FPGA
Non-volatile memory (Flash)32 MByte
Interfaces
Digital interfacecamera link 80-bit
Interface connectorSDR
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
White balance modesauto, manual
Image control featureslut, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresUser Sets, PWM(4), Sequencer,

Other HR models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision hr49CCL in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision hr49CCL in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the hr49CCL datasheet?

The specification is on this page, and a datasheet for the hr49CCL can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the hr49CCL into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the hr49CCL

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.