ALLIED VISION · AREA SCAN CAMERA

Allied Vision QUAD1.1SMGE-FGM8

The QUAD1.1SMGE-FGM8 is an area scan camera from Allied Vision: resolution 1280 × 864; megapixels 1.1 MP; max frame rate 2500 fps; interface GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision QUAD1.1SMGE-FGM8 area scan camera

QUAD1.1SMGE-FGM8 key specifications

Resolution1280 × 864
Megapixels1.1 MP
Max frame rate2500 fps
InterfaceGigE
SensorLuxima LUX13HS
Optical format4/3"
Pixel size13.7 µm
ShutterGlobal
Mono / colourMono
SpectrumVisible
Lens mountFG-Mount
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
ModelQUAD1.1SMGE-FGM8
Product codeF006132
Product seriesQuad GigE
StatusAvailable
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution1,280 × 864 (1.10 MP)
Sensor modelLuxima LUX13HS
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size17.54 × 11.84 mm (21.16 mm, Type 4/3)
Pixel size13.70 µm × 13.70 µm
Pixel formats
Sensor bit depth8-bit
Monochrome pixel formatsmono8
Timing and gain
Max. frame rate2500 fps
Max. frame rate ROI modes1280 x 864 | 2500 fps, 1280 x 720 | 3000 fps, 1024 x 768 | 2813 fps, 640 x 480 | 4501 fps, 512 x 512 | 4219 fps, 320 x 240 | 9002 fps, 128 x 128 | 16879 fps,
Exposure time1 µs to 1 s
Gain0.0 dB to 18.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 2 x TTL input, 4 x TTL output, 0 x 24V input, 0 x Open drain output,
Specific non-isolated lines0 x RS232 input, 0 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines0 x Optical isolated input, 0 x Optical isolated input,
I/O connector16-pin LEMO
Power supply10 to 30VDC
Power consumptionExternal: 11 W (typical)
Mechanical properties
Body dimensions (L x W x H in mm)120 × 65 × 65
IP classIP30
Lens mount(s)FG-Mount
Weight550 g
Interfaces
Digital interfacegige
Interface connector(RJ-45)
FW features - image control
Exposure modestimed, trigger-width, external
Gain modesdigital, analog
White balance modestrue
Image control featuresroi, mirror-image, dpc
FW features - camera control
Trigger modes/syncexternal

Other Recording models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision QUAD1.1SMGE-FGM8 in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision QUAD1.1SMGE-FGM8 in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the QUAD1.1SMGE-FGM8 datasheet?

The specification is on this page, and a datasheet for the QUAD1.1SMGE-FGM8 can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the QUAD1.1SMGE-FGM8 into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the QUAD1.1SMGE-FGM8

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.