ALLIED VISION · AREA SCAN CAMERA

Allied Vision shr661CXGE

The shr661CXGE is an area scan camera from Allied Vision: resolution 13392 × 9528; megapixels 127.6 MP; max frame rate 8.2 fps; interface 10GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision shr661CXGE area scan camera

shr661CXGE key specifications

Resolution13392 × 9528
Megapixels127.6 MP
Max frame rate8.2 fps
Interface10GigE
SensorSony IMX661
Optical format3.6"
Pixel size3.45 µm
ShutterGlobal
Mono / colourColour
SpectrumVisible
Lens mountM72x0.75
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelshr661CXGE
Product codeF004144
Product seriesSHR 10GigE
StatusAvailable
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution13,392 × 9,528 (127.60 MP)
Sensor modelSony IMX661
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size46.2 × 32.87 mm (56.7 mm, Type 3.6)
Pixel size3.45 µm × 3.45 µm
Pixel formats
Sensor bit depth8-bit, 12-bit
RGB pixel formatsbayer8, bayer12packed
Imaging performance
Dynamic range74.4 dB
SNR41.5 dB
Timing and gain
Max. frame rate8.2 fps
Exposure time163 µs to 60 s
Gain0.0 dB to 36.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC, Power over Ethernet (POE+, in option -P)
Power consumptionExternal: 18 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 60 °C
Mechanical properties
Body dimensions (L x W x H in mm)83 × 80 × 80
Filter/protection glassIR-Cut - 680nm
IP classIP30
Lens mount(s)M72x0.75
Weight580 g
On-board memory and FPGA
Non-volatile memory (Flash)32 MByte
Interfaces
Digital interface10gige
Interface connector(RJ-45)
Vision standardGigE Vision 2.0
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
White balance modesauto, manual
Image control featureslut, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresUser Sets, POE, PWM(4), Sequencer,

Other SHR models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision shr661CXGE in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision shr661CXGE in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the shr661CXGE datasheet?

The specification is on this page, and a datasheet for the shr661CXGE can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the shr661CXGE into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the shr661CXGE

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.