ALLIED VISION · AREA SCAN CAMERA

Allied Vision shr811CCX12

The shr811CCX12 is an area scan camera from Allied Vision: resolution 19200 × 12800; megapixels 245.8 MP; max frame rate 12.4 fps; interface CoaXPress. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision shr811CCX12 area scan camera

shr811CCX12 key specifications

Resolution19200 × 12800
Megapixels245.8 MP
Max frame rate12.4 fps
InterfaceCoaXPress
SensorSony IMX811
Optical format4.1"
Pixel size2.81 µm
ShutterRolling
Mono / colourColour
SpectrumVisible
Lens mountM72x0.75
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelshr811CCX12
Product codeF004228
Product seriesSHR CoaXPress
StatusAvailable
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution19,200 × 12,800 (245.80 MP)
Sensor modelSony IMX811
Sensor architecture (material)cmos
Shutter type(s)Rolling shutter (RS)
Sensor size53.95 × 35.97 mm (64.84 mm, Type 4.1)
Pixel size2.81 µm × 2.81 µm
Pixel formats
Sensor bit depth12-bit, 14-bit, 16-bit
RGB pixel formatsbayer12, bayer14, bayer16
Imaging performance
Dynamic range77.8 dB
SNR44.4 dB
Timing and gain
Max. frame rate12.4 fps
Exposure time109 µs to 60 s
Gain0.0 dB to 24.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC, Power over CoaXPress
Power consumptionExternal: 17 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 60 °C
Mechanical properties
Body dimensions (L x W x H in mm)86 × 80 × 80
IP classIP30
Lens mount(s)M72x0.75
Weight600 g
On-board memory and FPGA
Non-volatile memory (Flash)160 MByte
Interfaces
Digital interfacecxp-12 with 4 connections
Interface connector(micro-BNC)
Vision standardCoaXPress 2.0
FW features - image control
Exposure modesmanual, auto
Gain modesauto, manual
White balance modesauto, manual
Image control featuresroi, lut, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresPoCxP, User Sets, PWM(4), Sequencer,

Other SHR models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision shr811CCX12 in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision shr811CCX12 in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the shr811CCX12 datasheet?

The specification is on this page, and a datasheet for the shr811CCX12 can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the shr811CCX12 into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the shr811CCX12

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.