The MV-CL042-91CM is a line scan camera from HIKROBOT: resolution 4096 × 2; max line rate 40.5 Hz; interface Camera Link; pixel size 7 µm. DESSAR is an authorised channel partner for HIKROBOT machine vision in India. We supply it in India and build it into working inspection systems.

| Description | 4k Camera Link Line Scan Cameras,Mono |
|---|---|
| Resolution | 4096 × 2 |
| Max line rate | 40.5 Hz |
| Interface | Camera Link |
| Pixel size | 7 µm |
| Mono / colour | Mono |
| Lens mount | M42*1.0, flange back length 12 mm, applicable to F-mount, C-mount and lens of other types via lens adapter |
| Status | Available |
As published by HIKROBOT for this model.
| Product Model | MV-CL042-91CM |
|---|---|
| Type | 4k Camera Link Line Scan Cameras,Mono |
| Sensor type | CMOS |
|---|---|
| Pixel size | 7 μm |
| Resolution | 4096 × 2 |
| Image mode | Supports 1-line and 2-TDI |
| Max. line rate | 40.5 kHz (Base), 81 kHz (Medium), 100 kHz (Full) |
| Configuration mode | Base, Medium, Full |
| Tap geometry | 1X2, 1X4, 1X8 |
| Tap number | 2 Taps, 4 Taps, 8 Taps |
| Pixel clock | 40 MHz, 60 MHz, 70 MHz, 85 MHz |
| Dynamic range | 65.6 dB |
| SNR | 40 dB |
| Gain | Supports 1.0 ×, 1.4 ×, 1.6 ×, 2.4 ×, 3.2 × |
| Exposure time | 5 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure |
| Mono | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
|---|---|
| Digital I/O | 12-pin Hirose connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 5.5 W @ 12 VDC |
| Lens mount | M42*1.0, flange back length 12 mm, applicable to F-mount, C-mount and lens of other types via lens adapter |
|---|---|
| Dimension | 62 mm × 62 mm × 36.9 mm (2.4" × 2.4" × 1.5") |
| Weight | Approx. 238 g (0.5 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: –20 °C to 55 °C (–4 °F to 131 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 95% RH (no condensation) |
| Client software | MVS and frame grabber software meeting with Camera Link Protocol |
|---|---|
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V2.1, GenICam |
| Certification | CE, RoHS, KC |
DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the HIKROBOT MV-CL042-91CM in India. DESSAR is an authorised channel partner for HIKROBOT machine vision in India.
The specification is on this page, and a datasheet for the MV-CL042-91CM can be downloaded from the DESSAR vision hardware catalogue.
Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.
Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.