HIKROBOT · LINE SCAN CAMERA

HIKROBOT MV-CL161-41CM

The MV-CL161-41CM is a line scan camera from HIKROBOT: resolution 16384 × 1; max line rate 10 Hz; interface Camera Link; pixel size 3.5 µm. DESSAR is an authorised channel partner for HIKROBOT machine vision in India. We supply it in India and build it into working inspection systems.

HIKROBOT MV-CL161-41CM line scan camera

MV-CL161-41CM key specifications

Description16k Camera Link Line Scan Cameras,Mono
Resolution16384 × 1
Max line rate10 Hz
InterfaceCamera Link
Pixel size3.5 µm
Mono / colourMono
Lens mountM72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter
StatusDelisting Preparation

Full specification

As published by HIKROBOT for this model.

Model
Product ModelMV-CL161-41CM
Type16k Camera Link Line Scan Cameras,Mono
Performance
Sensor typeCMOS
Pixel size3.5 μm
Resolution16384 × 1
Image mode1-line
Max. line rate10 kHz (Base), 20 kHz (Medium), 40 kHz (Full), and 50 kHz (80-bit)
Configuration modeBase, Medium, Full, 80-bit
Tap geometry1 × 2, 1 × 4, 1 × 8, 1 × 10
Tap number2 Taps, 4 Taps, 8 Taps, 10 Taps
Pixel clock40 MHz, 66 MHz, 80 MHz, 85 MHz
Dynamic range64.7 dB
SNR44.3 dB
GainSupports 1 ×, 2 ×, 4 ×, 8 ×
Exposure time2 μs to 10 ms
Exposure modeOff/ Once/ Continuous exposure mode; supports fixed exposure time, trigger-width exposure
MonoMono
Pixel formatMono 8/10/12
BinningSupports 1 × 1, 2 × 2, 4 × 4
Reverse imageSupports horizontal reverse image output
Trigger modeExternal trigger, internal trigger
External trigger modeLine trigger, frame trigger, line + frame trigger
Electrical feature
Data interfaceCamera Link (SDR connector); USB interface for updating firmware
Digital I/O12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
Power supply12 VDC to 24 VDC
Power consumptionTyp. 7.2 W @ 12 VDC
Mechanical
Lens mountM72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter
Dimension76 mm × 76 mm × 42.1 mm (3.0" × 3.0" × 1.7")
WeightApprox. 320 g (0.7 lb.)
Ingress protectionIP40 (under proper lens installation and wiring)
TemperatureWorking temperature: 0 °C to 55 °C (32 °F to 131 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F)
Humidity5% RH to 90% RH (no condensation)
General
Client softwareMVS and frame grabber software meeting with Camera Link Protocol
Operating system32/64-bit Windows 7/10, 64-bit Windows 11
CompatibilityCamera Link V1.2, GenICam
CertificationCE, RoHS, KC

Other CL series models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the HIKROBOT MV-CL161-41CM in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the HIKROBOT MV-CL161-41CM in India. DESSAR is an authorised channel partner for HIKROBOT machine vision in India.

Where can I get the MV-CL161-41CM datasheet?

The specification is on this page, and a datasheet for the MV-CL161-41CM can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the MV-CL161-41CM into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the MV-CL161-41CM

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.