ALLIED VISION · AREA SCAN CAMERA

Allied Vision EoSens1.1CCX12-CM

The EoSens1.1CCX12-CM is an area scan camera from Allied Vision: resolution 1280 × 864; megapixels 1.1 MP; max frame rate 3674 fps; interface CoaXPress. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision EoSens1.1CCX12-CM area scan camera

EoSens1.1CCX12-CM key specifications

Resolution1280 × 864
Megapixels1.1 MP
Max frame rate3674 fps
InterfaceCoaXPress
SensorLuxima LUX13HS
Optical format4/3"
Pixel size13.7 µm
ShutterGlobal
Mono / colourColour
SpectrumVisible
Lens mountC-Mount
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
ModelEoSens1.1CCX12-CM
Product codeF006003
Product seriesEoSens CoaXPress-12
StatusAvailable
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution1,280 × 864 (1.10 MP)
Sensor modelLuxima LUX13HS
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size17.54 × 11.84 mm (21.16 mm, Type 4/3)
Pixel size13.70 µm × 13.70 µm
Pixel formats
Sensor bit depth8-bit, 10-bit
RGB pixel formatsbayer8, bayer10
Timing and gain
Max. frame rate3674 fps
Max. frame rate ROI modes1280 x 864 | 3674 fps, 1280 x 768 | 4151 fps, 640 x 480 | 6576 fps, 128 x 128 | 23821 fps, x | 224673 fps,
Exposure time2 µs to 1 s
Gain0.0 dB to 18.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 0 x Open drain output,
Specific non-isolated lines0 x RS232 input, 0 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines0 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply12 to 24VDC, Power over CoaXPress
Power consumptionExternal: 14 W (typical)
Mechanical properties
Body dimensions (L x W x H in mm)54 × 80 × 80
IP classIP30
Lens mount(s)C-Mount
Weight500 g
Interfaces
Digital interfacecxp-12 with 4 connections
Interface connector(micro-BNC)
Vision standardCoaXPress 2.0
FW features - image control
Exposure modesexternal
Gain modesdigital, analog
White balance modestrue
Image control featuresroi, mirror-image
FW features - camera control
Trigger modes/syncexternal, trigger-over-cxp

Other EoSens models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision EoSens1.1CCX12-CM in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision EoSens1.1CCX12-CM in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the EoSens1.1CCX12-CM datasheet?

The specification is on this page, and a datasheet for the EoSens1.1CCX12-CM can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the EoSens1.1CCX12-CM into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the EoSens1.1CCX12-CM

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.