ALLIED VISION · AREA SCAN CAMERA

Allied Vision EoSens3.0MCL-FM

The EoSens3.0MCL-FM is an area scan camera from Allied Vision: resolution 1690 × 1710; megapixels 3 MP; max frame rate 285 fps; interface Camera Link. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision EoSens3.0MCL-FM area scan camera

EoSens3.0MCL-FM key specifications

Resolution1690 × 1710
Megapixels3 MP
Max frame rate285 fps
InterfaceCamera Link
SensorON Semi LUPA3000
Optical format1"
Pixel size8 µm
ShutterGlobal
Mono / colourMono
SpectrumVisible
Lens mountF-Mount
StatusDiscontinued

Full specification

As published by Allied Vision for this model.

General
ModelEoSens3.0MCL-FM
Product codeF006016
Product seriesEoSens Camera Link
StatusDiscontinued
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution1,690 × 1,710 (3.00 MP)
Sensor modelON Semi LUPA3000
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size13.52 × 13.68 mm (19.23 mm, Type 1)
Pixel size8.00 µm × 8.00 µm
Pixel formats
Sensor bit depth8-bit
Monochrome pixel formatsmono8
Timing and gain
Max. frame rate285 fps
Max. frame rate ROI modes1690 x 1710 | 285 fps, 1280 x 1024 | 604 fps, 1020 x 768 | 951 fps, 640 x 480 | 2327 fps, 1280 x 64 | 9385 fps, 120 x 60 | 38502 fps, x | 181000 fps,
Exposure time1 µs to 1 s
Gain0.0 dB to 12.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 0 x 24V input, 0 x Open drain output,
Specific non-isolated lines0 x RS232 input, 0 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector6-pin Hirose HR10A-7P-6S
Power supply8 to 24VDC
Power consumptionExternal: 7 W (typical)
Mechanical properties
Body dimensions (L x W x H in mm)84 × 63 × 63
IP classIP30
Lens mount(s)F-Mount
Weight350 g
Interfaces
Digital interfacecamera link full
Interface connector(MDR)
FW features - image control
Exposure modesexternal
Gain modesdigital
White balance modestrue
Image control featuresroi, mirror-image
FW features - camera control
Trigger modes/syncexternal, cc-trigger

Other EoSens models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision EoSens3.0MCL-FM in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision EoSens3.0MCL-FM in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the EoSens3.0MCL-FM datasheet?

The specification is on this page, and a datasheet for the EoSens3.0MCL-FM can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the EoSens3.0MCL-FM into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the EoSens3.0MCL-FM

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.