ALLIED VISION · AREA SCAN CAMERA

Allied Vision exo183CCL

The exo183CCL is an area scan camera from Allied Vision: resolution 5488 × 3672; megapixels 20.2 MP; max frame rate 12 fps; interface Camera Link. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision exo183CCL area scan camera

exo183CCL key specifications

Resolution5488 × 3672
Megapixels20.2 MP
Max frame rate12 fps
InterfaceCamera Link
SensorSony IMX183
Optical format1"
Pixel size2.4 µm
ShutterRolling
Mono / colourColour
SpectrumVisible
Lens mountC-Mount
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelexo183CCL
Product codeF001901
Product seriesEXO Camera Link
StatusAvailable
Sensor
Sensor typeArea scan
ChromaColor
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution5,488 × 3,672 (20.20 MP)
Sensor modelSony IMX183
Sensor architecture (material)cmos
Shutter type(s)Rolling shutter (RS)
Sensor size13.17 × 8.81 mm (15.85 mm, Type 1)
Pixel size2.40 µm × 2.40 µm
Pixel formats
Sensor bit depth8-bit, 12-bit
RGB pixel formatsbayer8, bayer12
Imaging performance
Dynamic range71.5 dB
SNR40 dB
Timing and gain
Max. frame rate12 fps
Exposure time228 µs to 60 s
Gain0.0 dB to 27.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC
Power consumptionExternal: 4 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 60 °C
Mechanical properties
Body dimensions (L x W x H in mm)43 × 50 × 50
Filter/protection glassIR-Cut - 680nm
IP classIP40
Lens mount(s)C-Mount
Weight140 g
On-board memory and FPGA
Image buffer (RAM)192 MByte
Non-volatile memory (Flash)32 MByte
Interfaces
Digital interfaceCamera Link Base
Interface connector(MDR)
FW features - image control
Exposure modesmanual, auto
Gain modesauto, manual
White balance modesauto, manual
Image control featuresroi, lut, mirror-image
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresUser Sets, PWM(4), Sequencer,

Other EXO models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision exo183CCL in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision exo183CCL in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the exo183CCL datasheet?

The specification is on this page, and a datasheet for the exo183CCL can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the exo183CCL into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the exo183CCL

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.