ALLIED VISION · AREA SCAN CAMERA

Allied Vision exo304MCL

The exo304MCL is an area scan camera from Allied Vision: resolution 4096 × 3000; megapixels 12.3 MP; max frame rate 20 fps; interface Camera Link. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision exo304MCL area scan camera

exo304MCL key specifications

Resolution4096 × 3000
Megapixels12.3 MP
Max frame rate20 fps
InterfaceCamera Link
SensorSony IMX304
Optical format1.1"
Pixel size3.45 µm
ShutterGlobal
Mono / colourMono
SpectrumVisible
Lens mountC-Mount
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelexo304MCL
Product codeF001765
Product seriesEXO Camera Link
StatusAvailable
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution4,096 × 3,000 (12.30 MP)
Sensor modelSony IMX304
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size14.13 × 10.35 mm (17.52 mm, Type 1.1)
Pixel size3.45 µm × 3.45 µm
Pixel formats
Sensor bit depth8-bit, 12-bit
Monochrome pixel formatsmono8, mono12
Imaging performance
Dynamic range72 dB
SNR39.5 dB
Timing and gain
Max. frame rate20 fps
Exposure time29 µs to 60 s
Gain0.0 dB to 48.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC
Power consumptionExternal: 4 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 60 °C
Mechanical properties
Body dimensions (L x W x H in mm)43 × 50 × 50
Filter/protection glassK9 - AR coating - 400-850nm
IP classIP40
Lens mount(s)C-Mount
Weight140 g
On-board memory and FPGA
Image buffer (RAM)192 MByte
Non-volatile memory (Flash)32 MByte
Interfaces
Digital interfaceCamera Link Base
Interface connector(MDR)
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
Image control featuresroi, lut, mirror-image
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresUser Sets, PWM(4), Sequencer,

Other EXO models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision exo304MCL in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision exo304MCL in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the exo304MCL datasheet?

The specification is on this page, and a datasheet for the exo304MCL can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the exo304MCL into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the exo304MCL

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.