ALLIED VISION · AREA SCAN CAMERA

Allied Vision hr342MXGE

The hr342MXGE is an area scan camera from Allied Vision: resolution 6464 × 4852; megapixels 31.4 MP; max frame rate 35.4 fps; interface 10GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision hr342MXGE area scan camera

hr342MXGE key specifications

Resolution6464 × 4852
Megapixels31.4 MP
Max frame rate35.4 fps
Interface10GigE
SensorSony IMX342
Optical formatAPS-C"
Pixel size3.45 µm
ShutterGlobal
Mono / colourMono
SpectrumVisible
Lens mountM58x0.75
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelhr342MXGE
Product codeF004070
Product seriesHR 10GigE
StatusAvailable
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution6,464 × 4,852 (31.40 MP)
Sensor modelSony IMX342
Sensor architecture (material)cmos
Shutter type(s)Global shutter (GS)
Sensor size22.3 × 16.74 mm (27.88 mm, Type APS-C)
Pixel size3.45 µm × 3.45 µm
Pixel formats
Sensor bit depth8-bit, 12-bit
Monochrome pixel formatsmono8, mono12
Imaging performance
Dynamic range70.5 dB
SNR39.9 dB
Timing and gain
Max. frame rate35.4 fps
Exposure time19 µs to 60 s
Gain0.0 dB to 48.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply10 to 25VDC, Power over Ethernet (POE+, in option -P)
Power consumptionExternal: 16 W (typical)
Mechanical properties
Body dimensions (L x W x H in mm)80 × 70 × 70
Filter/protection glassN-BK7 - AR coating
IP classIP30
Lens mount(s)M58x0.75
Weight400 g
On-board memory and FPGA
Image buffer (RAM)448 MByte
Non-volatile memory (Flash)32 MByte
Interfaces
Digital interface10gige
Interface connector(RJ-45)
Vision standardGigE Vision 2.0
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
Image control featureslut, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresUser Sets, POE, PWM(4), Sequencer,

Other HR models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision hr342MXGE in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision hr342MXGE in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the hr342MXGE datasheet?

The specification is on this page, and a datasheet for the hr342MXGE can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the hr342MXGE into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the hr342MXGE

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.