ALLIED VISION · AREA SCAN CAMERA

Allied Vision hr455MXGE-T

The hr455MXGE-T is an area scan camera from Allied Vision: resolution 9568 × 6380; megapixels 61 MP; max frame rate 18 fps; interface 10GigE. DESSAR is an authorised channel partner for Allied Vision in India. We supply it in India and build it into working inspection systems.

Allied Vision hr455MXGE-T area scan camera

hr455MXGE-T key specifications

Resolution9568 × 6380
Megapixels61 MP
Max frame rate18 fps
Interface10GigE
SensorSony IMX455
Optical format2.7"
Pixel size3.76 µm
ShutterRolling
Mono / colourMono
SpectrumVisible
Lens mountM58x0.75
StatusAvailable

Full specification

As published by Allied Vision for this model.

General
Modelhr455MXGE-T
Product codeF004217
Product seriesHR 10GigE
StatusAvailable
Sensor
Sensor typeArea scan
ChromaMono
SpectrumVisible
Spectral range400 nm to 1000 nm
Resolution9,568 × 6,380 (61.00 MP)
Sensor modelSony IMX455
Sensor architecture (material)cmos
Shutter type(s)Rolling shutter (RS)
Sensor size35.98 × 23.99 mm (43.24 mm, Type 2.7)
Pixel size3.76 µm × 3.76 µm
Pixel formats
Sensor bit depth8-bit, 12-bit, 16-bit
Monochrome pixel formatsmono8, mono12, mono16
Imaging performance
Dynamic range81.4 dB
SNR47 dB
Timing and gain
Max. frame rate18 fps
Exposure time34 µs to 60 s
Gain0.0 dB to 36.0 dB
I/Os and power
Non-isolated lines0 x LVDS input, 0 x LVDS output, 0 x TTL input, 0 x TTL output, 2 x 24V input, 4 x Open drain output,
Specific non-isolated lines1 x RS232 input, 1 x RS232 output, 0 x RS422 input, 0 x RS422 output,
Opto-isolated lines1 x Optical isolated input, 0 x Optical isolated input,
I/O connector12-pin Hirose HR10A-10P-12S
Power supply21 to 25VDC, Power over Ethernet (POE+)
Power consumptionExternal: 30 W (typical)
Operating conditions
Operating temperature (housing)-10 °C to 70 °C
Mechanical properties
Body dimensions (L x W x H in mm)94 × 70 × 70
IP classIP30
Lens mount(s)M58x0.75
Weight590 g
On-board memory and FPGA
Image buffer (RAM)448 MByte
Interfaces
Digital interface10gige
Interface connector(RJ-45)
Vision standardGigE Vision 2.0
FW features - image control
Exposure modesmanual, auto, external
Gain modesauto, manual
Image control featureslut, mirror-image, dpc, shading-correction, ffc
FW features - camera control
Trigger modes/syncinternal, software, external
Camera control featuresUser Sets, POE, PWM(4), Sequencer,

Other HR models

Supplied and supported in India

Checked against your applicationTell us the part, the feature and the line rate. We confirm this model fits, or name the one that does.
The parts around itLens, light, cables, mounting and triggering specified with it, so it works first time.
Built into a systemWhere you need more than the component, we design, build and commission the inspection system.
Support from PuneCommissioning, troubleshooting and replacement handled by DESSAR engineers in India.

Common questions

Who supplies the Allied Vision hr455MXGE-T in India?

DESSAR Digital Intelligence (DESSAR Systems India Private Limited, Pune) supplies and supports the Allied Vision hr455MXGE-T in India. DESSAR is an authorised channel partner for Allied Vision in India.

Where can I get the hr455MXGE-T datasheet?

The specification is on this page, and a datasheet for the hr455MXGE-T can be downloaded from the DESSAR vision hardware catalogue.

Can DESSAR integrate the hr455MXGE-T into an inspection system?

Yes. DESSAR selects the optics, lighting and software around it, proves the result on your own samples, and commissions the system on your line.

Ask about the hr455MXGE-T

Send the quantity and the application. We reply with availability and, if it helps, a better-fitting alternative.